Continuous electricity, generated on site, with no fuel input.
Power On Generators are based on a closed magnetron-driven generation cycle. The unit produces continuous AC output without combustion, without fuel feed, without solar input, and without grid synchronisation. The output is grid-quality, frequency-stable, and rated for continuous operation at the design load.
A closed-cycle generation system
Inside the cabinet, an array of magnetrons drives a continuous electromagnetic generation cycle. The system is sealed, has no consumables, and produces no emissions. Output is conditioned through onboard power electronics to deliver clean three-phase AC at the site voltage.
Detailed engineering documentation, performance curves, and acceptance-test protocols are shared under NDA during the Discovery and Site Survey stages. They are not published here because the audience for this page is the buyer, not the technical reviewer.
Configured to your peak load
POG is configured per site. Indicative ranges below; final specification is set after the Site Survey.
| Continuous capacity | 30 kW per unit (entry); multi-unit configurations to 1 MW+ per site |
|---|---|
| Output | Three-phase AC, 400 V or 480 V at site voltage; frequency 50/60 Hz |
| Operating mode | Continuous primary, hot-standby, or N+1 redundant |
| Fuel input | None |
| Solar input | None |
| Grid input | None (islanded by design; grid-tied configurations available on request) |
| Scope-1 emissions | Zero per kWh delivered |
| Acoustic output | Quieter than equivalent diesel; suitable for urban deployment |
| Footprint | Compact; container-form-factor for larger configurations |
| Monitoring | Remote 24/7 telemetry; on-site service team for hands-on maintenance |
Engineering data sheets, type-test certificates, and reference performance curves are shared with qualified prospects during the engagement process.
Reportable, certifiable, audit-ready.
Because POG produces zero Scope-1 emissions per kilowatt-hour delivered, every kWh consumed from a POG installation is reportable as a direct emissions reduction in your Scope-1 baseline. Output is suitable for inclusion in Science-Based Targets (SBTi) pathways and is reportable under TCFD, ISSB, and the EU CSRD.
We support customers in the documentation needed to evidence emissions avoidance to their auditors and rating agencies (CDP, MSCI, Sustainalytics).
The technology details that matter to you depend on your site.
A Discovery Call is the fastest way to map POG to your specific operation. We will share the engineering material relevant to your load profile, ESG framework, and procurement structure.